Mounting Bracket Spacer Block 1/2" is used with Hunter Douglas Silhouette Shades, Vignette Modern Roman Shades and Honeycomb Shades. Also can be used for these manufactures: Hunter Douglas, Alta, Bali, The Shade Store, Levolor, Fashion Tech, Century Blinds, Skandia, Smith and Noble, 3 Day Blinds, Budget Blinds, Conrad Shades, Carole Fabrics, Kirsch and Graber.
How to install Spacer Block 1/2 Shims for Mounting Brackets:
IMPORTANT - If drilling into drywall make sure if you use more than one spacer block that the screw is long enough to reach the wood behind the drywall. You can tell because your drill will give you some resistance once it starts hitting the wood. If drilling into drywall the screw must be drilled into the wood or your blind may fall off the wall because drywall alone cannot hold the weight of the blind.
1. Locate proper bracket position on the wall or door your installing into and then use the screw to mark where you are going to drill the screw.
2. Use the long screws provided with the installation bracket and put screw through installation bracket first then threw hole in spacer block.
3. Hold both the spacer block and installation bracket together while drilling the screw into the marked hole from step 1.